147.225 Crosby repeater work

On Saturday December 17th, Mitch (AD0HJ) and Steve (N0CRM) went to the Crosby to adjust the repeater squelch level and load a new firmware update on the Fusion repeater.

There is a cyclic signal that is being seen on the input of the repeater. A slight adjustment to the Squelch level helped resolve the problem. The cyclic signal is still seen on the input, but the level change has helped

Both of the repeaters 147.225 on the bottom and 443.925 on the top.

imgp2212

imgp2210

Mitch AD0AHJ is loading new firmware updates into the repeater.
imgp2217

Leave a Reply